400x10x203 25А Grinding wheel Type-1 F60 35 m/s on Ceramic bond K 6

In stock
SKU
312341-10925
$34.86
More Information
Bond Ceramic
Wheel type 1
D - top diameter 400
T - wheel thickness 10
H - hole diameter 203
Abrasive 25А
Grain it FEPA F60
Hardness K
Structure 6
Angle speed 35
Manufacturer ZAK
Country Ukraine

400×10×203 mm 25A Grinding Wheel – Type 1 – F60 – 35 m/s – Vitrified bond – Grade K – Structure 6

Type 1 abrasive grinding wheel (straight wheel) in size 400×10×203 mm.
A versatile geometry for peripheral grinding, sharpening, surface grinding or cylindrical grinding, subject to the machine setup.

The abrasive, grit size and structure determine the stock-removal behaviour and the resulting surface condition.

What it actually does:

FEPA grit F60 positions this wheel for semi-finish grinding with controlled stock removal.
For this specification, maintain a clean, open and correctly dressed wheel surface.

Abrasive 25A — white fused aluminium oxide:

A high-purity, sharp and friable grain that renews its cutting edges and helps reduce the risk of thermal damage.

  • Hardened and tool steels
  • High-speed and alloy steels
  • Precision grinding and tool sharpening

FEPA grit size F60:

Medium-fine grain size for bonded abrasive products.

  • Balanced cutting performance
  • A more uniform surface than coarse grits
  • Suitable preparation for a finishing pass

Vitrified bond:

  • Provides strong form retention
  • Can be dressed accurately
  • Its porous matrix helps remove chips and heat

Limitation: Vitrified wheels are sensitive to impact and unauthorised side loading.

In practice:

If cutting action gives way to excessive rubbing, check the dressing condition, feed and coolant delivery.

Specification:

  • Type: 1 (straight wheel)
  • Size: 400×10×203 mm
  • Outside diameter D: 400 mm
  • Wheel thickness T: 10 mm
  • Bore diameter H: 203 mm
  • Abrasive: 25A, white fused aluminium oxide
  • Grit: FEPA F60
  • Wheel grade: K
  • Structure: 6
  • Bond: vitrified
  • Maximum operating speed: 35 m/s

Wheel grade K:

Medium-soft bond-holding characteristic.

  • Supports regular renewal of cutting edges
  • Performs well under moderate loading
  • Requires monitoring of wheel wear and profile retention

Structure 6:

Medium wheel structure.

  • Balanced grain and pore volume
  • Stable form retention
  • Predictable performance under consistent loading

Use for:

  • Peripheral grinding
  • Sharpening and sizing of working surfaces
  • Hardened and tool steels
  • High-speed and alloy steels
  • Precision grinding and tool sharpening

Do not use for:

  • Cemented carbide, glass and ceramics, where silicon carbide is generally more suitable
  • Heavy snagging with severe impact loading
  • Side loading unless specifically permitted by the wheel design
  • Operation above 35 m/s

Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
© Copyright - e-Store "Razvertka" Tokar tools - production and sale of tools You may not copy, reproduce, modify, publish, upload, transmit, and distribute any elements of this site, as well as their components, by any means and in any media without prior written permission.