450x50x203 14А Grinding wheel Type-1 F60 35 m/s on Ceramic bond L 7

In stock
SKU
311344-10020
$158.16
More Information
Bond Ceramic
Wheel type 1
D - top diameter 450
T - wheel thickness 50
H - hole diameter 203
Abrasive 14А
Grain it FEPA F60
Hardness L
Structure 7
Angle speed 35
Manufacturer ZAK
Country Ukraine

450×50×203 mm 14A Grinding Wheel – Type 1 – F60 – 35 m/s – Vitrified bond – Grade L – Structure 7

Type 1 abrasive grinding wheel (straight wheel) in size 450×50×203 mm.
A versatile geometry for peripheral grinding, sharpening, surface grinding or cylindrical grinding, subject to the machine setup.

This wheel size is intended for stationary grinding under parameters matched to the machine and workpiece material.

What it actually does:

FEPA grit F60 positions this wheel for semi-finish grinding with controlled stock removal.
For this specification, maintain a clean, open and correctly dressed wheel surface.

Abrasive 14A — regular aluminium oxide:

A tough aluminium oxide grain designed for productive grinding of materials with high tensile strength.

  • Carbon and low-alloy steels
  • Steel billets, forgings and castings
  • Rough and semi-finish grinding

FEPA grit size F60:

Medium-fine grain size for bonded abrasive products.

  • Balanced cutting performance
  • A more uniform surface than coarse grits
  • Suitable preparation for a finishing pass

Vitrified bond:

  • Provides strong form retention
  • Can be dressed accurately
  • Its porous matrix helps remove chips and heat

Limitation: Vitrified wheels are sensitive to impact and unauthorised side loading.

In practice:

Use a grinding load that keeps the grains cutting rather than rubbing continuously against the workpiece.

Specification:

  • Type: 1 (straight wheel)
  • Size: 450×50×203 mm
  • Outside diameter D: 450 mm
  • Wheel thickness T: 50 mm
  • Bore diameter H: 203 mm
  • Abrasive: 14A, regular aluminium oxide
  • Grit: FEPA F60
  • Wheel grade: L
  • Structure: 7
  • Bond: vitrified
  • Maximum operating speed: 35 m/s

Wheel grade L:

Medium-soft bond-holding characteristic.

  • Supports regular renewal of cutting edges
  • Performs well under moderate loading
  • Requires monitoring of wheel wear and profile retention

Structure 7:

Moderately open wheel structure.

  • More chip clearance
  • Improved coolant access to the grinding zone
  • Reduced risk of wheel loading during prolonged contact

Use for:

  • Peripheral grinding
  • Sharpening and sizing of working surfaces
  • Carbon and low-alloy steels
  • Steel billets, forgings and castings
  • Rough and semi-finish grinding

Do not use for:

  • Cemented carbide and technical ceramics
  • Precision grinding of hardened steel where a cooler-cutting friable grain is required
  • Side loading unless specifically permitted by the wheel design
  • Operation above 35 m/s

Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
© Copyright - e-Store "Razvertka" Tokar tools - production and sale of tools You may not copy, reproduce, modify, publish, upload, transmit, and distribute any elements of this site, as well as their components, by any means and in any media without prior written permission.