We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
250x20x76 14А Grinding wheel Type-1 F46 35 m/s on Ceramic bond L 6
| Bond | Ceramic |
|---|---|
| Wheel type | 1 |
| D - top diameter | 250 |
| T - wheel thickness | 20 |
| H - hole diameter | 76 |
| Abrasive | 14А |
| Grain it FEPA | F46 |
| Hardness | L |
| Structure | 6 |
| Angle speed | 35 |
| Manufacturer | ZAK |
| Country | Ukraine |
250×20×76 mm 14A Grinding Wheel – Type 1 – F46 – 35 m/s – Vitrified bond – Grade L – Structure 6
Type 1 abrasive grinding wheel (straight wheel) in size 250×20×76 mm.
A versatile geometry for peripheral grinding, sharpening, surface grinding or cylindrical grinding, subject to the machine setup.
Consistent results require the correct combination of feed, dressing, coolant application and contact area.
What it actually does:
FEPA grit F46 positions this wheel for general roughing and semi-finishing.
For this specification, maintain a clean, open and correctly dressed wheel surface.
Abrasive 14A — regular aluminium oxide:
A tough aluminium oxide grain designed for productive grinding of materials with high tensile strength.
- Carbon and low-alloy steels
- Steel billets, forgings and castings
- Rough and semi-finish grinding
FEPA grit size F46:
Medium grain size for bonded abrasive products.
- Productive material removal
- Suitable for establishing geometry
- Leaves the surface ready for further finishing when tighter requirements apply
Vitrified bond:
- Provides strong form retention
- Can be dressed accurately
- Its porous matrix helps remove chips and heat
Limitation: Vitrified wheels are sensitive to impact and unauthorised side loading.
In practice:
Use a grinding load that keeps the grains cutting rather than rubbing continuously against the workpiece.
Specification:
- Type: 1 (straight wheel)
- Size: 250×20×76 mm
- Outside diameter D: 250 mm
- Wheel thickness T: 20 mm
- Bore diameter H: 76 mm
- Abrasive: 14A, regular aluminium oxide
- Grit: FEPA F46
- Wheel grade: L
- Structure: 6
- Bond: vitrified
- Maximum operating speed: 35 m/s
Wheel grade L:
Medium-soft bond-holding characteristic.
- Supports regular renewal of cutting edges
- Performs well under moderate loading
- Requires monitoring of wheel wear and profile retention
Structure 6:
Medium wheel structure.
- Balanced grain and pore volume
- Stable form retention
- Predictable performance under consistent loading
Use for:
- Peripheral grinding
- Sharpening and sizing of working surfaces
- Carbon and low-alloy steels
- Steel billets, forgings and castings
- Rough and semi-finish grinding
Do not use for:
- Cemented carbide and technical ceramics
- Precision grinding of hardened steel where a cooler-cutting friable grain is required
- Side loading unless specifically permitted by the wheel design
- Operation above 35 m/s
Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.