We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
800x100x290 14А Grinding wheel Type-1 F120 m/s on Ceramic bond 2.75
| Bond | Ceramic |
|---|---|
| Wheel type | 1 |
| D - top diameter | 800 |
| T - wheel thickness | 100 |
| H - hole diameter | 290 |
| Abrasive | 14А |
| Grain it FEPA | F120 |
| Hardness | 2.75 |
| Manufacturer | ZAK |
| Country | Ukraine |
800×100×290 mm 14A Grinding Wheel – Type 1 – F120 – 120 m/s – Vitrified bond – Grade 2.75
Type 1 abrasive grinding wheel (straight wheel) in size 800×100×290 mm.
A versatile geometry for peripheral grinding, sharpening, surface grinding or cylindrical grinding, subject to the machine setup.
The specification is intended to provide predictable cutting action and stable development of the working surface.
What it actually does:
FEPA grit F120 positions this wheel for fine finishing and precision sizing.
For this specification, maintain a clean, open and correctly dressed wheel surface.
Abrasive 14A — regular aluminium oxide:
A tough aluminium oxide grain designed for productive grinding of materials with high tensile strength.
- Carbon and low-alloy steels
- Steel billets, forgings and castings
- Rough and semi-finish grinding
FEPA grit size F120:
Very fine grain size for bonded abrasive products.
- Low stock removal per pass
- High surface uniformity
- Sensitive to overloading and wheel loading
Vitrified bond:
- Provides strong form retention
- Can be dressed accurately
- Its porous matrix helps remove chips and heat
Limitation: Vitrified wheels are sensitive to impact and unauthorised side loading.
In practice:
Set the final operating parameters for the actual workpiece material and hardness without exceeding the marked wheel speed.
Specification:
- Type: 1 (straight wheel)
- Size: 800×100×290 mm
- Outside diameter D: 800 mm
- Wheel thickness T: 100 mm
- Bore diameter H: 290 mm
- Abrasive: 14A, regular aluminium oxide
- Grit: FEPA F120
- Wheel grade: 2.75
- Bond: vitrified
- Maximum operating speed: 120 m/s
Wheel grade 2.75:
As specified in the source data bond-holding characteristic.
- Confirm this value against the wheel label or technical certificate
- Set the grinding parameters only after the actual wheel grade has been verified
Structure :
Dense wheel structure.
- High abrasive-grain concentration
- Good retention of the working form
- Requires careful control of loading and heat generation
Use for:
- Peripheral grinding
- Sharpening and sizing of working surfaces
- Carbon and low-alloy steels
- Steel billets, forgings and castings
- Rough and semi-finish grinding
Do not use for:
- Cemented carbide and technical ceramics
- Precision grinding of hardened steel where a cooler-cutting friable grain is required
- Side loading unless specifically permitted by the wheel design
- Operation above 120 m/s
Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.