500x50x203 54С Grinding wheel Type-1 F46 35 m/s on Ceramic bond L 6

500x50x203 54C Grinding Wheel Type 1 F46 35 m/s on Ceramic Bond L6

Straight grinding wheel (Type 1) with black silicon carbide abrasive 54C on ceramic bond.
Designed for grinding cast iron, carbide, ceramics and other hard brittle materials where stable cutting and wheel durability are important.

What it actually does:

Medium-coarse grinding with stable cutting action and controlled stock removal.
Suitable for general grinding, tool sharpening and intermediate grinding operations.

Abrasive type (54C):

54C is black silicon carbide with increased mechanical strength and toughness compared with green silicon carbide grades.

• Higher toughness and impact resistance
• Less brittle than green silicon carbide
• Stable cutting under continuous load
• Suitable for aggressive industrial grinding

Black silicon carbide contains approximately 98% SiC and combines high hardness with improved grain durability.

Grain size (F46):

Medium-coarse FEPA grit for productive grinding with moderate surface finish quality.

• Good stock removal rate
• Stable grinding behavior
• Visible grinding pattern after machining

More controlled than F24/F36, but still intended mainly for rough and semi-finish grinding.

Ceramic bond behavior:

Vitrified bond provides high rigidity, thermal resistance and dimensional stability.
The porous structure improves coolant penetration and chip evacuation during grinding.

In practice:

This is a general-purpose industrial grinding wheel for hard and brittle materials.
Suitable for stock removal, sharpening and intermediate grinding operations before finer finishing stages.

Specification:

• Type: 1 (straight wheel)
• Bond: Ceramic (vitrified)
• Abrasive: 54C black silicon carbide
• Grit: FEPA F46
• Hardness: L
• Structure: 6
• Max speed: 35 m/s
• Manufacturer: ZAK
• Country of origin: Ukraine

Dimensions (D × T × H):

• D: 500 mm outer diameter
• T: 50 mm wheel thickness
• H: 203 mm bore diameter

Behavior:

• Aggressive cutting action
• High abrasive durability
• Stable wheel geometry
• Good heat resistance

Use for:

• Cast iron grinding
• Carbide grinding
• Ceramic materials
• Tool sharpening
• General industrial grinding

Do not use for:

• Mirror polishing
• Ultra-fine finishing
• Heavy-pressure grinding of soft steels