750x100x305 25А Grinding wheel Type-1 F60 50 m/s on Ceramic bond N 7

In stock
SKU
312355-10157
$1,250.35
More Information
Bond Ceramic
Wheel type 1
D - top diameter 750
T - wheel thickness 100
H - hole diameter 305
Abrasive 25А
Grain it FEPA F60
Hardness N
Structure 7
Angle speed 50
Manufacturer ZAK
Country Ukraine

750×100×305 mm 25A Grinding Wheel – Type 1 – F60 – 50 m/s – Vitrified bond – Grade N – Structure 7

Type 1 abrasive grinding wheel (straight wheel) in size 750×100×305 mm.
A versatile geometry for peripheral grinding, sharpening, surface grinding or cylindrical grinding, subject to the machine setup.

The wheel acts as a multi-point cutting tool and must be installed on equipment designed for its mounting profile.

What it actually does:

FEPA grit F60 positions this wheel for semi-finish grinding with controlled stock removal.
The main objective of this configuration is to balance stock removal with reliable profile retention.

Abrasive 25A — white fused aluminium oxide:

A high-purity, sharp and friable grain that renews its cutting edges and helps reduce the risk of thermal damage.

  • Hardened and tool steels
  • High-speed and alloy steels
  • Precision grinding and tool sharpening

FEPA grit size F60:

Medium-fine grain size for bonded abrasive products.

  • Balanced cutting performance
  • A more uniform surface than coarse grits
  • Suitable preparation for a finishing pass

Vitrified bond:

  • Provides strong form retention
  • Can be dressed accurately
  • Its porous matrix helps remove chips and heat

Limitation: Vitrified wheels are sensitive to impact and unauthorised side loading.

In practice:

Start with a moderate feed and adjust the process according to surface condition, grinding sound and spindle load.

Specification:

  • Type: 1 (straight wheel)
  • Size: 750×100×305 mm
  • Outside diameter D: 750 mm
  • Wheel thickness T: 100 mm
  • Bore diameter H: 305 mm
  • Abrasive: 25A, white fused aluminium oxide
  • Grit: FEPA F60
  • Wheel grade: N
  • Structure: 7
  • Bond: vitrified
  • Maximum operating speed: 50 m/s

Wheel grade N:

Medium bond-holding characteristic.

  • Balances self-sharpening and wheel life
  • Stable performance with a consistent feed
  • A versatile grade for steady grinding contact

Structure 7:

Moderately open wheel structure.

  • More chip clearance
  • Improved coolant access to the grinding zone
  • Reduced risk of wheel loading during prolonged contact

Use for:

  • Peripheral grinding
  • Sharpening and sizing of working surfaces
  • Hardened and tool steels
  • High-speed and alloy steels
  • Precision grinding and tool sharpening

Do not use for:

  • Cemented carbide, glass and ceramics, where silicon carbide is generally more suitable
  • Heavy snagging with severe impact loading
  • Side loading unless specifically permitted by the wheel design
  • Operation above 50 m/s

Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
© Copyright - e-Store "Razvertka" Tokar tools - production and sale of tools You may not copy, reproduce, modify, publish, upload, transmit, and distribute any elements of this site, as well as their components, by any means and in any media without prior written permission.