4B2 dish grinding wheels 180x6x1.6x14x20x51 A B2-01 100% ACH M 40

4B2 Diamond Grinding Wheel – Dish Type | FEPA M40 (40/28 μm)

4B2 dish grinding wheel for sharpening and preparation of tool face surfaces.
Designed for carbide and other hard brittle materials.

Where it is actually used:

Used for face grinding and sharpening at transition stage between rough and finishing.
Typical applications include:

• Face grinding of end mills and milling cutters after rough grinding
• Sharpening of carbide saw blades
• Preparation of reamers before micron finishing sequence

The dish shape provides accurate contact on flat and angular surfaces.

What it actually does:

Moderate material removal with initial surface stabilization.
Removes marks from D91 / D107 and prepares surface for micron sequence.

Grain size (M40 ≈ 40/28 μm):

• Higher stock removal than fine micron grits
• Typical Ra ~ 0.20–0.40 μm
• Transition step before M25 → M20 sequence

In practice:

This is a transition wheel.
Used after rough grinding and before M25.
Focus is stabilizing geometry and preparing for finishing.

Specification:

• Type: 4B2 (dish)
• Abrasive: Synthetic diamond (АСН)
• Grit: FEPA M40 ≈ 40/28 μm (ANSI ~400–500)
• Concentration: 100%
• Body: P / A / S / Ap
  (Pressed / Aluminum / Steel / Aluplast)

Body options:

• Pressed: lighter weight, vibration damping, better surface finish
• Aluminum: lightweight with good rigidity, general-purpose solution
• Steel: maximum rigidity for heavy-duty grinding
• Aluplast: balanced weight and rigidity

Why this shape:

• Accurate face contact
• Access to cutting edges
• Suitable for angular surfaces

Use for:

• Face grinding
• Tool sharpening
• Transition grinding

Do not use for:

• Heavy rough grinding
• Final polishing (use M10)
• Steel