1A1 Шліфувальний круг прямого профілю 300x5x40x51 P B2-01 100% cBN1 B 213

1A1 CBN Grinding Wheel – FEPA B213 (212/180 μm) | CBN1

Straight CBN grinding wheel (1A1) for extreme rough grinding and maximum stock removal on hardened steels.
Designed for HSS, tool steel and other ferrous materials.

What it actually does:

Removes large volumes of material as fast as possible.
Used for initial shaping where speed and productivity are critical.

Grain size (B213 ≈ 212/180 μm):

Ultra-coarse grit for extreme-duty grinding.

• Maximum possible stock removal rate
• Typical Ra ~ 2.0–4.0 μm
• Leaves very rough surface with deep scratches

Stable under extreme grinding conditions and high load.

In practice:

This is a bulk removal wheel.
Used as the first step before B181 → B151 → B126.
Focus is maximum productivity, not precision.

Specification:

• Type: 1A1 (straight)
• Abrasive: Cubic Boron Nitride (CBN1)
• Grit: FEPA B213 ≈ 212/180 μm (ANSI 70/80)
• Concentration: 100%
• Body: P / S / Ap
  (Pressed / Steel / Aluplast)

Behavior:

• Extreme cutting aggressiveness
• Maximum productivity
• Very rough surface finish
• Note: requires full grinding sequence after

Body options:

• P: lighter, vibration damping
• S: maximum rigidity for extreme load
• Ap: balanced performance

Dimensions (D × X × T × H):

• D – outer diameter
• X – abrasive layer
• T – total thickness
• H – bore diameter

Use for:

• HSS grinding
• Tool steel
• Hardened components
• Heavy stock removal

Do not use for:

• Carbide
• Ceramics
• Non-ferrous materials