900x40x305 25А Grinding wheel Type-1 F46 50 m/s on Ceramic bond P 5

In stock
SKU
312356-10527
$763.72
More Information
Bond Ceramic
Wheel type 1
D - top diameter 900
T - wheel thickness 40
H - hole diameter 305
Abrasive 25А
Grain it FEPA F46
Hardness P
Structure 5
Angle speed 50
Manufacturer ZAK
Country Ukraine

900×40×305 mm 25A Grinding Wheel – Type 1 – F46 – 50 m/s – Vitrified bond – Grade P – Structure 5

Type 1 abrasive grinding wheel (straight wheel) in size 900×40×305 mm.
A versatile geometry for peripheral grinding, sharpening, surface grinding or cylindrical grinding, subject to the machine setup.

The wheel acts as a multi-point cutting tool and must be installed on equipment designed for its mounting profile.

What it actually does:

FEPA grit F46 positions this wheel for general roughing and semi-finishing.
The main objective of this configuration is to balance stock removal with reliable profile retention.

Abrasive 25A — white fused aluminium oxide:

A high-purity, sharp and friable grain that renews its cutting edges and helps reduce the risk of thermal damage.

  • Hardened and tool steels
  • High-speed and alloy steels
  • Precision grinding and tool sharpening

FEPA grit size F46:

Medium grain size for bonded abrasive products.

  • Productive material removal
  • Suitable for establishing geometry
  • Leaves the surface ready for further finishing when tighter requirements apply

Vitrified bond:

  • Provides strong form retention
  • Can be dressed accurately
  • Its porous matrix helps remove chips and heat

Limitation: Vitrified wheels are sensitive to impact and unauthorised side loading.

In practice:

Dressing should restore geometry and cutting ability without unnecessarily weakening the working surface.

Specification:

  • Type: 1 (straight wheel)
  • Size: 900×40×305 mm
  • Outside diameter D: 900 mm
  • Wheel thickness T: 40 mm
  • Bore diameter H: 305 mm
  • Abrasive: 25A, white fused aluminium oxide
  • Grit: FEPA F46
  • Wheel grade: P
  • Structure: 5
  • Bond: vitrified
  • Maximum operating speed: 50 m/s

Wheel grade P:

Medium-hard bond-holding characteristic.

  • Retains abrasive grains more strongly
  • Maintains the working profile well
  • May glaze if the grinding load is too low

Structure 5:

Medium wheel structure.

  • Balanced grain and pore volume
  • Stable form retention
  • Predictable performance under consistent loading

Use for:

  • Peripheral grinding
  • Sharpening and sizing of working surfaces
  • Hardened and tool steels
  • High-speed and alloy steels
  • Precision grinding and tool sharpening

Do not use for:

  • Cemented carbide, glass and ceramics, where silicon carbide is generally more suitable
  • Heavy snagging with severe impact loading
  • Side loading unless specifically permitted by the wheel design
  • Operation above 50 m/s

Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
© Copyright - e-Store "Razvertka" Tokar tools - production and sale of tools You may not copy, reproduce, modify, publish, upload, transmit, and distribute any elements of this site, as well as their components, by any means and in any media without prior written permission.