1A1 straight grinding wheels 80x3x3x10 S B2-01 100% cBN1 B 151

1A1 CBN Grinding Wheel – FEPA B151 (150/125 μm) | CBN1

Straight CBN grinding wheel (1A1) for heavy rough grinding and maximum stock removal on hardened steels.
Designed for HSS, tool steel and other ferrous materials.

What it actually does:

Very aggressive material removal with minimal surface quality.
Used for initial shaping and removing large amounts of material quickly.

Grain size (B151 ≈ 150/125 μm):

Extra coarse grit for maximum productivity.

• Maximum stock removal rate
• Typical Ra ~ 1.0–2.0 μm
• Leaves deep and visible scratches

Stable under heavy grinding conditions and high load.

In practice:

This is a primary roughing wheel for steels.
Used as the first step before B126 → B107 → B91.
Focus is speed and bulk material removal.

Specification:

• Type: 1A1 (straight)
• Abrasive: Cubic Boron Nitride (CBN1)
• Grit: FEPA B151 ≈ 150/125 μm (ANSI 100/120)
• Concentration: 100%
• Body: P / S / Ap
  (Pressed / Steel / Aluplast)

Behavior:

• Maximum cutting aggressiveness
• Very high productivity
• Low surface quality
• Note: requires full grinding sequence after

Body options:

• P: lighter, vibration damping
• S: maximum rigidity for heavy grinding
• Ap: balanced performance

Dimensions (D × X × T × H):

• D – outer diameter
• X – abrasive layer
• T – total thickness
• H – bore diameter

Use for:

• HSS grinding
• Tool steel
• Hardened components
• Heavy stock removal

Do not use for:

• Carbide
• Ceramics
• Non-ferrous materials